EzCopy Stand Alone DD4

EzCopy Stand Alone DD4

$399.00

The EzCopy DD4 is the ideal disk drive copier solution for corporate IT professionals, system integrators, OEMs, lab testing environments, and service technicians.

SKU: ezcopy_standalone4 Category:

Product Description

The EzCopy DD4 is the ideal disk drive copier solution for corporate IT professionals, system integrators, OEMs, lab testing environments, and service technicians. This is a stand alone drive duplicator for Serial ATA (SATA) with optional copy of IDE drives using the optional Disk Caddies. EzCopy DD4 is shipped with two 3.5″ SATA caddies. The EzCopy DD4 is small, fast and easy to use. It requires no connection to a computer so it doesn’t tie up computer resources. It provides an exact image of the source disk with the touch of a button. An easy to read LCD makes its front panel operation a snap.

Complete Serial ATA(SATA) and Parallel IDE Solutions Copy any SATA drive to IDE and Vice-Versa

The EzCopy DD4 EzRaid now provides true SATA and IDE disk copy capabilities at an affordable price.

With its Hot Swap technology, the EzCopy DD4 now has available 3.5” and 2.5” caddies allowing any IDE or SATA drives be attached to the EzCopy DD4 and making possible the creation of an exact copy of an IDE drive to a SATA or SATA to IDE.

Features

  • Stand alone SATA drive copier
  • True “bit by bit” hardware copying process
  • Requires no computer hookup
  • Insert your drives, push a button, walk away
  • Optional caddy for 3.5″ SATA and IDE available
  • Optional caddies for 2.5″ SATA and IDE laptop drives available
  • Front panel status indicators
  • Support for mixed (dissimilar) drive sizes and manufacturers
  • Free Partition Express partition expander utility
  • Fast copy at 1 GB per minute

Additional Information

Weight 15 lbs

Reviews

There are no reviews yet.

Be the first to review “EzCopy Stand Alone DD4”

Drive Interface Serial ATA
Two 3.5-inch drive caddies

Physical Dimensions Length: 11.45 Inch / 29.1 cm
Width: 7.0 Inch / 17.8 cm
Height: 6.67 Inch / 16.9 cm

Electrical Input Voltage: 90-240 AC
Power: 80 Watts

MTBF MIL-HDBK-217 = 580,383 hours
Bellcore rating = 2,695,418 hours

Copy Speed 1-Gigabyte per minute

Capacity Up to 144 petabytes
48 bit LBA support

Serial Port RS-232 (used for firmware upgrade)
8 bits, 1 stop, 9600 BPS, No protocol

EMC/EMI Compliance FCC Class B Certificate