EzCopy Light DD4

EZCopy Light

$249.00

The EzCopy Light DD4 is a “Lighter” version of our EzCopy DD4. It is the ideal disk drive copier solution for corporate IT professionals, system integrators, OEMs, lab testing environments, and service technicians.

SKU: ezcopy_light-26 Category:

Product Description

The EzCopy Light DD4 is a “Lighter” version of our EzCopy DD4. It is the ideal disk drive copier solution for corporate IT professionals, system integrators, OEMs, lab testing environments, and service technicians. This is a stand alone drive duplicator for Serial ATA (SATA) hard drives. It requires onlySATA power connection to the unit and to the two drives (either from a computer or from an external power supply).It provides an exact image of the source disk with the touch of a button.

The EzCopy Light DD4 can be set up and operated entirely through the easy to use front panel LCD. It is an ideal solution for UNIX, LINUX or Solaris, as well as Windows installations.
To install the EzCopy Light DD4 simply connect a SATA power connector to the unit and to the two drives (either from a computer or from an external power supply) to the DD4 EzCopy Light. Use one SATA cable to connect your Source drive to Channel 1 and a second SATA cable to connect your Target drive to Channel 2. Turn the power and follow the instructions on the LCD panel to perform an exact copy of the two drives. No need for special drivers, no interrupt or software.

Features

  • Stand alone SATA drive copier
  • Copies 3.5″ and 2.5″ SATA drives
  • Easy to use front panel LCD
  • True “bit by bit” hardware copying process
  • O/S independence
  • Requires only SATA power connection
  • Install your drives, push a button, walk away
  • Front panel status indicators
  • Support for mixed (dissimilar) drive sizes and manufacturers
  • Fast copy at 1 GB per minute
  • Supports drives up to 144 petabytes (48 bit LBA)

Reviews

There are no reviews yet.

Be the first to review “EZCopy Light”

Drive Interface SATA I

Data Path SATA I
Defined by host controller

Electrical Input Voltage 5V DC (+/- 5%)
Current 450ma operating, 600ma peak

Physical Dimensions Length: 5.83 Inch / 14.8 cm
Width: 5.75 Inch / 14.6 cm
Height: 1.65 Inch / 4.2 cm

Operating Temperature: 0 – 50°C
Humidity: 8 to 87% non-condensing

Copy Speed 1-Gigabyte per minute

USB Used for firmware upgrades

MTBF MIL-HDBK-217 = 580,383 hours
Bellcore rating = 2,695,418 hours

EMC/EMI Compliance FCC class B certification
CE certification