Call toll free 1-800-458-1666
 
 
 
EzCopy Upgrade


File Name: EzCopy_602_604_up.zip

File Size: 237 KB

Installation Instructions
  1. If you have a DOS boot diskette, unzip EzCopy_602_604_up.zip onto your bootable diskette. Also, download and copy “Duplidisk DOS Utility” to your DOS boot diskette from http://arcoide.com/support_downloads.php
  2. If you do not have a DOS boot diskette, create a DOS boot diskette from the CD provided with the Duplidisk. If you do not have the CD, download "Duplidisk DOS Boot Disk Maker for Windows" from http://arcoide.com/support_downloads.php. Remove all ACP.* files from the bootable diskette and unzip EzCopy_602_604_up.zip onto the bootable diskette.
    Note: Here are the individual file details included in this upgrade:
    Code602.hex - (Upgrade Code)
    Data604.hex –(Upgrade Data)
    Ecopy602.txt - (Pointer File)
  3. FLASH INSTRUCTIONS! PLEASE READ CAREFULLY!
    This Duplidisk 3 firmware upgrade must be done by following the directions in the order detailed below:
    1. Using the Null Modem Cable (supplied) connect the Female end to your Computer’s COM port and the Male end to the back of the EzCopy.
    2. Reboot the PC from the DOS diskette and select the EzCopy Firmware Upgrade.
    3. In the Configure dropdown menu select FIRMWARE UPGRADE.
    4. Select Ecopy602.txt. After the upgrade is completed, remove the diskette and re-start the machine.


 
© 2004 All Rights Reserved.