|
File Name: EzRaid_517_606_up.zip
File Size: 227 KB |
| Installation
Instructions |
- If you have a DOS boot diskette, unzip EzRaid_517_606_up.zip onto your bootable diskette. Also, download and copy “Duplidisk DOS Utility” to your DOS boot diskette from http://arcoide.com/support_downloads.php
- If you do not have a DOS boot diskette, create a DOS boot diskette from the CD provided with the Duplidisk. If you do not have the CD, download "Duplidisk DOS Boot Disk Maker for Windows" from http://arcoide.com/support_downloads.php. Remove all ACP.* files from the bootable diskette and unzip EzRaid_517_606_up.zip onto the bootable diskette. Note: Here are the individual files details included in this upgrade: Code517.hex - (Upgrade Code) Data606.hex – (Upgrade Data) Dupli517.txt - (Pointer File)
- FLASH INSTRUCTIONS! PLEASE READ CAREFULLY! This Duplidisk 3 firmware upgrade must be done by following the directions in the order detailed below:
- Reboot the PC from the DOS diskette and select Duplidisk 2 and 3 support utility software.
- In the Configure dropdown menu select FIRMWARE UPGRADE.
- Select Dupli517.txt. After the upgrade is completed, remove the diskette and power cycle your computer.
- The firmware upgrade is completed you can now resume normal operation.
|
