Call toll free 1-800-458-1666
 
 
 

SATA Devices
EzRaid DD4 3.5" BayMount
EzRaid DD4 5.25" Baymount
SATA FLexMount
EzRaid DD4 Dual Swap+
eSATA RAID+
 
IDE Devices
MicroRAID 3.5"
3.5" Bay
5.25" Bay
RAIDcase
EZRAID
PCI
FlexMount
No Slot
ISA




Part No. DD3-PCI     MSRP: $239.00

Avoid costly and annoying downtime. Get up to the minute backup protection for your hard drive with the DD3 PCI RAID controller. The DD3 PCI controller provides real time backup through IDE RAID 1 hardware disk mirroring to ensure that you will always have an exact, up to date RAID backup of your drive.

Featuring our easy to use DupliDisk mirroring technology, the DD3 PCI fits perfectly into any standard PCI slot, however the PCI slot is used for power only--not for data transfer. It's the ideal solution to mirror your IDE drives where no free external drive bays are available.

Just insert the DD3 PCI into a free PCI bus slot, connect your IDE (Parallel ATA) drives to the DD3 PCI and the DD3 PCI to your motherboard with the provided cables. Then run our quick and easy mirroring utility. When you're done, you'll have real time backup!

Every time you save data to your drive, the DD3 PCI will automatically send the information to both drives, so you always have an exact (and bootable, where applicable) duplicate of your drive and all the information it contains. If one of the drives fails, an alarm will sound to let you know a drive needs to be replaced but the other drive will take over automatically. And your computer and your business will stay up and running!

The DD3 PCI controller requires no driver or IRQ. It sends data to both drives simultaneously so there's no lag time and no performance hit on your computer.

The DD3 PCI provides back panel status lights, serial port and alarm reset.

Features & Benefits

  • Operating system Indendent
  • Patented DupliDisk IDE mirroring technology
  • Utilizes the PCI slot for power only
  • True background rebuild
  • Audible and visual alarms
  • LED status lights.
  • Requires no drivers, IRQs or TSRs
  • Easy to use DupliDisk management utility
  • Remote notification via e-mail
  • Optional serial port for remote administration
  • All necessary cables included.
  • IDE, EIDE UDMA 100/66/33 (Parallel ATA) support
  • Supports drives up to 144 petabytes.
  • 48 Bit LBA support.
  • Support for drives of dissimilar sizes
 Specifications  
  Drive Interface  IDE/E-IDE/UDMA (Parallel ATA)
  Data Path   IDE/E-IDE/UDMA
  Defined by host controller
  Hard Disk Interface   Cable 18 inches maximum
  80 Conductor - 40 pin connector
  Host Interface   Cable 18 inches maximum
  80 Conductor - 40 pin connector
  Electrical Input   Voltage 5V DC (+/- 5%)
  Current 450ma operating, 600ma peak
  Physical Dimensions   Length: 4.725"
  Width: 4.027”
  Operating   Temperature: 0 to 50 degrees C
  Humidity: 8 to 87% non-condensing
  MTBF MIL-HDBK-217 = 580,383 hours
Bellcore rating = 2,695,418 hours
  EMC/EMI Compliance FCC class B certification
CE certification


Key Mechanical Measurements


DPS Warranty
1 Year Warranty
30-day satisfaction guarantee

 

 
© 2008 All Rights Reserved.